FHD IPTV on Zgemma


Zgemma2 boxes set up guide :

WE SUGGEST YOU USE IPAB IMAGE ON YOUR RECEIVER. A LIST OFF SUPPORTED DEVICES CAN BE FOUND : www.ipab.tv.

ZGEMMA IMAGE IS HERE :

http://ipad.tv/ipad-tv-custom-image-download-links/

(Using zgemma as an example, select what ever box you have though)

FLASH  ZGEMMA FOLLOW THESE STEPS BELOW USING A LAPTOP OR PC

Download the image from the above link.

https://www.dropbox.com/s/v2q2pklexx5sts0/zgemma.ipk?dl=0

Unzip the download.

Copy ONLY the zgemma folder to a USB drive that has been formatted as FAT32.

Place the USB drive into one of USB slots on the Zgemma.

Ensure NO OTHER USB dev,ces are attached.

Power the box off fully.

Use the switch on the rear of the box.

Power on the box.

Use the switch on the rear of the box.

You will see a message on the LCD Screen to confirm the box is flashing Vail for the flashing to complete.

This will take approx 5 minutes.

Once flashing is Complete. The box I reboot itself.

Once the flashing has completed, remove the USB drive you us. to flash from the USB slot

ADDING YOUR SUB :

 

Exit all screens press red the number 4 then number 1.

Download this IPK file to your laptop or tablet :

https://www.dropbox.com/s/v2q2pklexx5sts0/zgemma.ipk?dl=0

Use Filezilla to send the IPK file to the /tmp folder of you box.

Press the blue button on the remote and scroll to plugins, then install location extension.

Select the download file and install.

Restart the box, menu, plugins, IPTV bouquet maker, change update to enable and 24hr.

Enter our supplied username and password and press run, this will take a few minutes if done right and all IPTV channels will load.

 

0 comments

  • There are no comments yet. Be the first one to post a comment on this article!

Leave a comment

Please note, comments must be approved before they are published